There are 2 switches in the Ezonexam LAN, with no routers. Ports 1, 2 & 3 are assigned to VLAN 1 in switch 1 and 2 and ports 4, 5 & 6 are assigned to VLAN 2 in both switches. These two switches are connected together via a trunked link. Which of the condi

题目内容(请给出正确答案)

There are 2 switches in the Ezonexam LAN, with no routers. Ports 1, 2 & 3 are assigned to VLAN 1 in switch 1 and 2 and ports 4, 5 & 6 are assigned to VLAN 2 in both switches. These two switches are connected together via a trunked link. Which of the conditions below would verify trunk and VLAN operation? (Select all valid answers)

A．Host 1 on VLAN 1 can ping Host 2 on VLAN 1

B．Host 1 on VLAN 1 can ping Host 4 on VLAN 2

C．Host 1 on VLAN 1 can not ping Host 2 on VLAN 1

D．Host 4 on VLAN 2 can not ping Host 1 on VLAN 1

E．Host 4 on VLAN 2 can ping Host 2 on VLAN 2

如果没有搜索结果或未解决您的问题，请直接联系老师获取答案。

更多相关问题

第1题

A Ezonexam switch is configured with all ports assigned to VLAN 2. In addition, all ports are configured as full-duplex FastEthernet. What is the effect of adding switch ports to a new VLAN on this switch?A．The additions will create more collisions domains.B．IP address utilization will be more efficient.C．More bandwidth will be required than was needed previously.D．An additional broadcast domain will be created.E．The possibility that switching loops will occur will increase dramatically.

点击查看答案
第2题

What must the Ezonexam network administrator do in order to successfully configure a VLAN trunk between two switches named VE1 and VE2? (Select two answer choices)A. Set each end of the trunk line to IEEE 802.1Q encapsulation.B. Set the same VTP management domain name on both switches.C. Set all ports on the two switched as access ports.D. Configure one of the two switches as a VTP server.E. Connect the two switches using a rollover cable.F. Use a router to forward VTP traffic between the VLANs.

点击查看答案
第3题

Both bridges are switches are being used throughout the Ezonexam LAN. Which of the following statements are true regarding bridges and switches in this network?(Choose 3)A. Switches are primarily software based while bridges are hardware based.B. Switches usually have a higher number of ports than most bridges.C. Bridges are frequently faster than switches.D. Bridges define broadcast domains while switches define collision domains.E. Both bridges and switches forward Layer 2 broadcasts.F. Both bridges and switches make forwarding decisions based on Layer 2 addresses.

点击查看答案
第4题

A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

点击查看答案
第5题

In which of the following scenarios would the "show cdp neighbors detail"command be an appropriate troubleshooting tool?()A. Two switches are connected via a trunk. Both switches have been assigned an IP address, subnet mask, and default gateway. A ping is successful between the two switches. However, VLAN information is not passed from one switch to the other switch.B. A router and a switch have been assigned an IP address, a subnet mask, and a default gateway. They are directly connected, but a ping between the two devices fails.C. A router connects to another router through a serial interface. Both routers have been assigned an IP address, subnet mask, and default gateway. The routers are running RIP and the networks directly connected to the first router do not pass to the second router. However, a ping from one router to the serial interface of the directly connected neighboring router is successful.D. A router connects to another router via a switch. Both routers and the switch have been assigned an IP address, subnet mask, and default gateway. Neither the routers nor the switch are able to ping one of the hosts that is directly to the switch.

点击查看答案
第6题

There are 2 switches in the Testking LAN, with no routers. Ports 1, 2 & 3 are assigned to VLAN 1 in switch 1 and 2 and ports 4, 5 & 6 are assigned to VLAN 2 in both switches. These two switches are connected together via a trunked link.Which of the conditions below would verify trunk and VLAN operation?（）A. Host 1 on VLAN 1 can ping Host 2 on VLAN 1B. Host 1 on VLAN 1 can ping Host 4 on VLAN 2C. Host 1 on VLAN 1 can not ping Host 2 on VLAN 1D. Host 4 on VLAN 2 can not ping Host 1 on VLAN 1E. Host 4 on VLAN 2 can ping Host 2 on VLAN 2

点击查看答案
第7题

A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches.Which of the following must you do to accomplish this?（）A. You must set each end of the trunk line to IEEE 802.1e encapsulation.B. You must set the same VTP management domain name on both switches.C. You must set all ports on the two switches as access ports.D. You must configure one of the switches as a VTP server.E. You must use a rollover cable to connect the two switches.

点击查看答案

There are 2 switches in the Ezonexam LAN, with no routers. Ports 1, 2 3 are assigned to VLAN 1 in switch 1 and 2 and ports 4, 5 6 are assigned to VLAN 2 in both switches. These two switches are connected together via a trunked link. Which of the conditi

题目内容(请给出正确答案)

更多相关问题

第1题

第2题

第3题

第4题

第5题

第6题

第7题

相关内容