Which three elements must be used when you configure a router interface for vlan trunking?()A. one IP network or subnetwork for each subinterfaceB. subinterface numbering that matches vlan tagesC. subinterface encapsulation identifiers that match vlan tag

题目内容(请给出正确答案)

Which three elements must be used when you configure a router interface for vlan trunking?()

A. one IP network or subnetwork for each subinterface

B. subinterface numbering that matches vlan tages

C. subinterface encapsulation identifiers that match vlan tags

D. a management domain for each subinterface

E. one physical interface for each subinterface

F. one subinterface per vlan

如果没有搜索结果或未解决您的问题，请直接联系老师获取答案。

更多相关问题

第1题

A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

点击查看答案
第2题

You wish to configure IPv6 support on a router which does not have any current IPv4 configuration.Which three steps are used to configure IPv6 with an accompanying IGP in JUNOS software? ()A. set protocols isis inet6B. set routing-options router-id router-idC. set protocols ospf3 area 0 interface allD. set interface fe-0/0/1 unit 0 family inet6E. set routing-options ipv6-router-id router-id

点击查看答案
第3题

Which two steps are needed when configuring multiple RPs using MSDP within a single PIM domain? ()A. Configure a non-unique address on the loopback interface for use by the PIM RP.B. Configure MSDP with the unique address (router ID) as the local address of the peer.C. Configure MSDP with the non-unique address (router ID) as the local address of the peer.D. Configure a unique address on the loopback interface, used as the PIM RP.

点击查看答案
第4题

Which of the following protocols would be used in order to log into a router to configure a VLAN?()A.RDPB.SMTPC.TELNETD.FTP

点击查看答案
第5题

You are about to configure PPP n the interface of a Cisco router. Which authentication methods could you use?()A.SSLB.SLIPC.PAPD.LAPBE.CHAPF.VNP

点击查看答案
第6题

Which statements about 802.1Q trunking in Secure Network Foundation Design Guide for Single Site Deployments are correct？（）A、The Cisco Control VLAN carries only Layer 2 control trafficB、802.1Q trunking is used between the access switch and the routerC、There is no 802.1Q trunking used in these designsD、When 802.1Q trunks are configured， they are also called Native VLANsE、Trunking Ensures that traffic from only one VLAN is carried on that trunk

点击查看答案
第7题

When configuring private VLANs， which configuration task must you do first？（）A、Configure the private VLAN port parameters.B、Configure and map the secondary VLAN to the primary VLAN.C、Disable IGMP snooping.D、Set the VTP mode to transparent.

点击查看答案

Which three elements must be used when you configure a router interface for vlan trunking?()

题目内容(请给出正确答案)

更多相关问题

第1题

第2题

第3题

第4题

第5题

第6题

第7题

相关内容